This unique connector is now widely
used in applications where previously
only metallic braid shielded leads
were accepted. . .
BG's new Flash-Tite Spark Plug
Connector is designed for use
with 5/16" ID silicone hose, 7mm
ignition cable, and the specially
designed coil connectors found in
this catalog. A Flash-Tite Lead
Assembly is safer than a conventional
unshielded secondary lead
because it prevents disassembly
of the lead from the spark plug
while the engine is running. . .
The coil end of the lead must be
disconnected first! Designed for
use with unshielded spark plugs,
the Flash-Tite Connector is springloaded
to contain the arc in the
event of flashover of the spark
plug insulator.
Flash-Tite Lead Assemblies have
several major advantages over
conventional shielded leads: In
the event of spark plug leakage,
combustion gases do not become
"trapped" inside the lead. Any
leakage is vented. Internal condensation
of combustion gases is
frequently a source of maintenance
problems in shielded lead applications.
Although the Flash-Tite
Connector is vented, it is designed
so that rain and moisture cannot
enter the lead or the connector.
And since there is no metallic cover
on a Flash-Tite lead, firing indicators
and analyzer pick-ups may be
used, simplifying trouble-shooting.
Flash-Tite Spark Plug Connectors
are easy to assemble using P/N
21200-04 stud. (Order separately.)
Complete instructions are provided.
Complete Lead Assemblies are also
available. . .
See the following page.
AVAILABLE IN THE
FOLLOWING LENGTHS:
| P/N* |
Extended Length |
Compressed Length |
| 21600 |
7.825" |
6.825" |
| 21620 |
10.000" |
9.000" |
| 21660 |
6.825" |
5.825" |
| 21800 |
5.315" |
4.315" |
| 21940 |
14.000" |
13.000" |
| 22510 |
17.000" |
16.000" |
| 23285 |
19.000" |
18.000" |
| 23285 |
19.000" |
18.000" |
*NOTE: CHAMPION Plug models W10, W14, and W18 require a larger inside
diameter than the above. Indicate this by adding the suffix -W to the part
number (example: 21600-W). Not available on model 21800.
Spark Plugs with extra long insulators,such as the RB77WPC, require a deeper
boot. Indicate this by adding the suffix - L to the part number.
Not available on models 21660 and 21800.
